Click to Zoom
  The Practical Single-Hand Sword is based on the Marshall sword, so named for one of England’s finest knights of the latter half of the 12th century. The sword is classically styled, with a cruciform hilt, wheel pommel and a ridged-and-fullered blade that is both stiff and surprisingly light. With a weight of less than 2 ? lbs., the sword can be wielded forcefully without undue wear and tear on the arm. Our Practical broadswords (SH2106, SH2046, SH2047) are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. Made for the re-enactor Authentic look and feel Complies with safety requirements Blade length: 30“Handle length: 6 1/2”Overall length: 36 1/2“Weight: 2lb 7ozThickness at Guard: .230Box height: 28”Box width: 6”Specs will vary slightly from piece to piece.
  The Practical Single-Hand Sword is based on the Marshall sword, so named for one of England’s finest knights of the latter half of the 12th century. The sword is classically styled, with a cruciform hilt, wheel pommel and a ridged-and-fullered blade that is both stiff and surprisingly light. With a weight of less than 2 ? lbs., the sword can be wielded forcefully without undue wear and tear on the arm. Our Practical broadswords (SH2106, SH2046, SH2047) are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. Made for the re-enactor Authentic look and feel Complies with safety requirements Blade length: 30“Handle length: 6 1/2”Overall length: 36 1/2“Weight: 2lb 7ozThickness at Guard: .230Box height: 28”Box width: 6”Specs will vary slightly from piece to piece.

Partnumber: SH2046_vk
       
Business Solutions Login / Register
About Us Order Status
Contact Us
Cart:
0 - Items in cart
CPU Holders / Mounts
 

Hanwei - Practical Single Hand - SH2046

  Manufacturer Part#: SH2046_vk
SKU: 223189

  The Practical Single-Hand Sword is based on the Marshall sword, so named for one of England’s finest knights of the latter half of the 12th century. The sword is classically styled, with a cruciform hilt, wheel pommel and a ridged-and-fullered blade that is both stiff and surprisingly light. With a weight of less than 2 ? lbs., the sword can be wielded forcefully without undue wear and tear on the arm. Our Practical broadswords (SH2106, SH2046, SH2047) are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. Made for the re-enactor Authentic look and feel Complies with safety requirements Blade length: 30“Handle length: 6 1/2”Overall length: 36 1/2“Weight: 2lb 7ozThickness at Guard: .230Box height: 28”Box width: 6”Specs will vary slightly from piece to piece.
Only
$ 104.00
Shipping Info:
click here for estimated shipping
Qty  
Buy Now

get stock alert

Availability
Backordered Back-Ordered
Condition
Brand New Brand New


 
Hanwei - Practical Single Hand - SH2046 - SH2046_vk
CAS Iberia
 
Overview
Specifications
Similar Products
Product Reviews
 
  The Practical Single-Hand Sword is based on the Marshall sword, so named for one of England’s finest knights of the latter half of the 12th century. The sword is classically styled, with a cruciform hilt, wheel pommel and a ridged-and-fullered blade that is both stiff and surprisingly light. With a weight of less than 2 ? lbs., the sword can be wielded forcefully without undue wear and tear on the arm. Our Practical broadswords (SH2106, SH2046, SH2047) are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. Made for the re-enactor Authentic look and feel Complies with safety requirements Blade length: 30“Handle length: 6 1/2”Overall length: 36 1/2“Weight: 2lb 7ozThickness at Guard: .230Box height: 28”Box width: 6”Specs will vary slightly from piece to piece.

Partnumber: SH2046_vk
black friday fee shipping
Katerno.com is an Upfront Merchant on TheFind. Click for info.
bizrate Customer Certified Site - Katerno Reviews at Bizrate

At all times, Katerno will use best efforts to maintain its accuracy. However, if at any time the data or images provided are incorrectly priced or below fair market value or availability has substantially changed or image or descriptions contain inaccuracies, Katerno shall not be held responsible or liable, furthermore Katerno reserves the right to reject any orders placed based on this erroneous information.
 
 
       
Shopping
Store Info
Katerno
   
 
 
  © 2008 - 2014 Katerno.com. All rights reserved.


Katerno .com    
 my cart
   

Loading Cart...
 
   
Click to close